Repository logo
 

Effects of walking speed on knee joint loading estimated via musculoskeletal modeling

dc.contributor.authorHaight, Derek Joseph, author
dc.contributor.authorBrowning, Ray, advisor
dc.contributor.authorReiser, Raoul, committee member
dc.contributor.authorPuttlitz, Christian, committee member
dc.contributor.authorGreene, David, committee member
dc.date.accessioned2007-01-03T08:11:06Z
dc.date.available2007-01-03T08:11:06Z
dc.date.issued2012
dc.description.abstractWalking is the most common form of physical activity and is assumed to incur a relatively small risk of musculoskeletal injury. However, walking related- musculoskeletal injuries, particularly at the knee joint, are not uncommon in individuals who walk for exercise. Surprisingly, there is scant data regarding how walking conditions (e.g. speed, grade, surface) affect loads (i.e. contact forces) across lower extremity joints. Studies to date have used proxy measures of joint loading, primarily net muscle moments (NMM); however the validity of these proxy measures to estimate joint contact forces (JCF) is not well established. The purpose of this study was to estimate knee JCFs during slow, moderate and fast walking and to examine the validity of NMMs to estimate JCFs. We hypothesized that both knee JCFs and sagittal plane NMMs would increase with walking speed, but that the increases in NMMs would be much greater than the increases in axial JCFs. We collected kinematic and kinetic data as ten adults (mass = 67.2 (12.0) kg, mean (SD)) walked on a dual-belt force measuring treadmill at 0.75, 1.25, and 1.50 m•s-1. An OpenSim three-dimensional musculoskeletal model with 23 degrees of freedom and 92 muscle actuators was scaled to each subject. We calculated NMMs and muscle forces via inverse dynamics and static optimization, respectively, for 5 gait cycles per subject at each speed. We determined knee JCFs from the vector sum of the joint reaction force and individual muscle forces crossing the knee joint, in the tibial reference frame. During weight acceptance in early stance, axial and anterior-posterior knee JCFs increased by ~30% and 175%, respectively as walking speed increased from 0.75 m•s-1 to 1.50 m•s-1. At the same point in the gait cycle, peak sagittal plane extensor NMM increased by over 200% (P<0.001) as speed increased. The modest differences in axial knee JCFs with walking speed, suggest that slower speeds may not reduce joint loading substantially. Additionally, our results suggest that NMMs are not a good proxy measure of axial JCFs and that detailed musculoskeletal models should be used to quantify the effects of walking conditions on joint loading.
dc.format.mediumborn digital
dc.format.mediummasters theses
dc.identifierHaight_colostate_0053N_11274.pdf
dc.identifierETDF2012500223BIOM
dc.identifier.urihttp://hdl.handle.net/10217/68114
dc.languageEnglish
dc.language.isoeng
dc.publisherColorado State University. Libraries
dc.relation.ispartof2000-2019
dc.rightsCopyright and other restrictions may apply. User is responsible for compliance with all applicable laws. For information about copyright law, please see https://libguides.colostate.edu/copyright.
dc.subjectOpenSim
dc.subjectnet muscle moments
dc.subjecttibiofemoral
dc.subjectcontact forces
dc.subjectgait
dc.titleEffects of walking speed on knee joint loading estimated via musculoskeletal modeling
dc.typeText
dcterms.rights.dplaThis Item is protected by copyright and/or related rights (https://rightsstatements.org/vocab/InC/1.0/). You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s).
thesis.degree.disciplineBiomedical Engineering
thesis.degree.grantorColorado State University
thesis.degree.levelMasters
thesis.degree.nameMaster of Science (M.S.)

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Haight_colostate_0053N_11274.pdf
Size:
1.87 MB
Format:
Adobe Portable Document Format
Description: