Repository logo
 

Computational modeling of wind turbine wake interactions

dc.contributor.authorDavis, Cole J., author
dc.contributor.authorVenayagamoorthy, S. Karan, advisor
dc.contributor.authorHeyliger, Paul R., advisor
dc.contributor.authorMaloney, Eric D., committee member
dc.date.accessioned2007-01-03T08:03:01Z
dc.date.available2007-01-03T08:03:01Z
dc.date.issued2012
dc.description.abstractThe rapid expansion of the wind energy market necessitates the need for advanced computational modeling and understanding of wind turbine aerodynamics and wake interactions. The following thesis work looks to study turbulence closure methods widely used in computational fluid dynamics (CFD) and their applicability for modeling wind turbine aerodynamics. The first investigation is a parametric study of turbulence models and their performance on geometries of stationary in-line turbines and disks spaced at different intervals. A variety of Reynolds-averaged Navier-Stokes (RANS) closure schemes (Spalart-Allmaras, Standard k-ε, k-ε Realizable, k-ε RNG, Standard k-ω, k-ω SST) were studied as well as a large eddy simulation (LES) with a dynamic Smagorinsky-Lilly sub-grid scale (SGS) model. The simulations showed the grid refinement to be inadequate for LES studies. The RANS closure schemes did not indicate a dominant model. However, relevant literature on separating flows has shown the k-ω SST model to be preeminent. The second investigation uses only the k-ω SST RANS closure scheme to model wake development and resolution for both a single fully resolved rotating turbine as well as two in-line fully resolved rotating turbines. These simulations were successful in predicting wake development and resolution, as well as predicting velocity deficits experienced by the downstream turbine. Vorticity results also showed an accurate wake structure and helical tendencies. In the third investigation, a grid independence study was performed to gain an accurate pressure distribution on the blade surfaces for a separate, collaborative, non-linear, structural study of wind turbine blades. This study showed a strong asymptotic relationship of the maximum pressure on the blades to the predicted Bernoulli pressure on the blade. The results of this research show clear wake development, structure and resolution. The velocity deficits found translate directly in to power deficits for downstream turbines and the vorticity translates directly into increased fatigue experienced by the blades. In contrast to the vast super-computer simulations found in literature, all simulations in this thesis work were calculated using four parallel processors. The accuracy was achieved through assumptions, which were designed to maintain the desired physics while simplifying the complexity of the problem to the capabilities of desktop computing. This research demonstrates the significance of model design and capabilities and accuracy achievable using desktop computing power. This has vast implications of accessibility into academia and the further development of the wind power industry.
dc.format.mediumborn digital
dc.format.mediummasters theses
dc.identifierDavis_Cole_colostate_0053N_11022.pdf
dc.identifierETDF2012500024CVEE
dc.identifier.urihttp://hdl.handle.net/10217/65318
dc.languageEnglish
dc.language.isoeng
dc.publisherColorado State University. Libraries
dc.relation.ispartof2000-2019
dc.rightsCopyright and other restrictions may apply. User is responsible for compliance with all applicable laws. For information about copyright law, please see https://libguides.colostate.edu/copyright.
dc.subjectCFD
dc.subjectwind power
dc.subjectwake interaction
dc.subjectRANS
dc.titleComputational modeling of wind turbine wake interactions
dc.typeText
dcterms.rights.dplaThis Item is protected by copyright and/or related rights (https://rightsstatements.org/vocab/InC/1.0/). You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s).
thesis.degree.disciplineCivil and Environmental Engineering
thesis.degree.grantorColorado State University
thesis.degree.levelMasters
thesis.degree.nameMaster of Science (M.S.)

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Davis_Cole_colostate_0053N_11022.pdf
Size:
2.68 MB
Format:
Adobe Portable Document Format
Description: